How to Find Hidden Piping and Valves
If you are a homeowner then you need to know the details of your home like the back of your hand. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.
There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. Such gas systems usually have the shutoff valve near the water heater or the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. For such valves using a metal detector may come in handy since they are usually metallic in nature. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.