8.9.1 WORKSHEET INTERNET SEARCH FOR NIC DRIVER DETAILS:
|File Size:||34.2 MB|
|Supported systems:||Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10|
|Price:||Free* (*Free Registration Required)|
8.9.1 WORKSHEET INTERNET SEARCH FOR NIC DRIVER
NOTE: Thermal compound is only necessary when not included on the heat sink. Follow all instructions provided by the manufacturer for specific application details.
- Ite pc v40_chapter8
- Null Internet Access Ip Address
- Table of Contents
- Chapter 8 - Fundamental Networks.ppt - IT Essentials PC...
Plug the fan connector into the motherboard. Refer to the motherboard manual to determine which set of fan header pins to use.
Step 5 Locate the RAM slots on the motherboard. In what type of slot s will the RAM module s be installed? How many notches are found on the bottom edge of the RAM module?
Align the notch es on the bottom edge of the RAM module to the notches in the slot. Press down until the side tabs secure the RAM module. Ensure that none of the RAM module contacts are visible. Reseat the RAM module if necessary.
Check the latches to verify that the RAM module is secure. Install any additional RAM modules using the same procedures. Step 6 Install the motherboard standoffs. Align the connectors on the back of the motherboard with the openings in the back of the computer case. Place the motherboard into the case and align the holes for 8.9.1 worksheet internet search for nic screws and the stand- offs.
You may need to adjust the motherboard to line up the holes for the screws. Attach the motherboard to the case using the appropriate screws. Step 7 Connect the wires from the case link lights and buttons to the motherboard connectors. In this lab, you will install the hard disk drive, the optical drive, 8.9.1 worksheet internet search for nic the floppy drive. Slide the hard disk drive into the bay from the inside of the case until the screw holes line up with the holes in the 3. Secure the hard disk drive to the case using the proper screws. Step 2 Note: Remove the 5.
Chapter 8 - Fundamental Networks.ppt - IT Essentials PC...
Align the optical drive with the 5. Insert the optical drive into the drive bay from the front of the case until the screw holes line up with the holes in the 5. Secure the optical drive to the case using the proper screws. Step 3 Note: Remove the 3.
Regan, IT Essentials: PC Hardware and Software Labs and Study Guide Pearson
Align the floppy drive with the 3. Insert the floppy drive into the drive bay from the front of the case until the screw holes line up with the holes in the 3.
Secure the floppy drive to the case using the proper screws. Locate a compatible expansion slot for the NIC on the motherboard.
Remove the slot cover from the back of the case, if necessary. Align the NIC to the expansion slot. Press down gently on the NIC until the card is fully seated.Chapter 8 – Worksheet/Student. Worksheet: Internet Search for NIC Drivers. Print and complete this worksheet.
In this worksheet, you will search the. Worksheet: Internet Search for NIC Drivers.
Print and complete this worksheet. In this worksheet, you will search the Internet for the latest NIC drivers for a.